Sale!

BeagleBone Black Rev C - 4GB Flash - Pre-installed Debian

ADF-1876

New product

More info

The BeagleBone Black is the newest member of the BeagleBoard family. It is a lower-cost, high-expansion focused BeagleBoard using a low cost Sitara XAM3359AZCZ100 Cortex A8 ARM processor from Texas Instruments. It is similar to the Beaglebone,but with some features removed and some features added.

Official WIKI

As of May 12, 2014 the BBB comes with Debian Linux w/the 3.8.13-bone kernel

  • Processor: Sitara AM3358BZCZ100 1GHz, 2000 MIPS
  • Graphics Engine: SGX530 3D, 20M Polygons/S
  • SDRAM Memory: 512MB DDR3L 606MHZ
  • Onboard Flash: 4GB, 8bit Embedded MMC
  • PMIC: TPS65217C PMIC regulator and one additional LDO.
  • Debug Support: Optional Onboard 20-pin CTI JTAG, Serial Header
  • Power Source: miniUSB USB or DC Jack, 5VDC External Via Expansion Header
  • PCB: 86.44mm x 54.54mm / 3.4 x 2.15 6 layers
  • 88.98mm x 54.54mm x 15.41mm / 3.5" x 2.15" x 0.6"
  • Indicators 1-Power, 2-Ethernet, 4-User Controllable LEDs
  • HiSpeed USB 2.0 Client Port: Access to USB0, Client mode via miniUSB
  • HiSpeed USB 2.0 Host Port Access to USB1, Type A Socket, 500mA LS/FS/HS
  • Serial Port UART0 access via 6 pin 3.3V TTL Header. Header is populated
  • Ethernet 10/100, RJ45
  • SD/MMC Connector microSD , 3.3V
  • User Input: Reset Button, Boot Button, Power Button
  • Video Out: 16b HDMI, 1280x1024 (MAX), 1024x768,1280x720,1440x900 w/EDID Support
  • Audio Via HDMI Interface, Stereo
  • Expansion Connectors:
    • Power 5V, 3.3V , VDD_ADC(1.8V)
    • 3.3V I/O on all signals
    • McASP0, SPI1, I2C, GPIO(65), LCD, GPMC, MMC1, MMC2, 7 AIN(1.8V MAX), 4 Timers, 3 Serial Ports, CAN0, EHRPWM(0,2),XDMA Interrupt, Power button, Expansion Board ID (Up to 4 can be stacked)
  • Weight 40.55g / 1.43oz

Reviews

No customer reviews for the moment.

Write a review

BeagleBone Black Rev C - 4GB Flash - Pre-installed Debian

BeagleBone Black Rev C - 4GB Flash - Pre-installed Debian